So I got out a big wrench, and alternately loosened my fork caps, until one of them fired like a rocket, under pressure from the compressed fork spring, and made a large dent in my wooden overhead garage door, and I’m thinking, hmmm… So I drilled holes in my fork caps, actually Vic did it for me, cause he has a drill press, and tapped the holes for a pipe thread, and fitted them with a 3/8” allen plug. The holes are big enough to accept the nipple from an oil filler bottle. I have 2 filler bottles, measure the correct amount for each side, drain from the bottom, put the bottom plugs back in….and carefully squeeze the precious fluid into each tube. And no more dealings with those pesky springs. It’s just a matter of finding the correct weight oil. The Harley manual, the bible, says to use Genuine HD Type E , which I found to be a little “squishy,” I did some internet research and found some charts, confusing viscosity numbers, and replacement guides pertaining to fork oil, ...